Stake
Step-by-step guide on how to stake your assets via Cobo Portal, including selecting assets and understanding staking processes.
Select the BTC or ETH tab to view specific instructions for each.
-
Click
on Cobo Portal, find Staking, then click Open to open Staking. -
Click Stake under Actions in the row for Babylon.
-
In the pop-up window, fill in the following information.
- PoS Chain: Select a Proof of Stake (PoS) chain.
- Finality Provider: You can either select a finality provider from the drop-down list or customize your finality provider by clicking Customize and entering the public key.
- Staking Wallet: Select an address from the drop-down list. The addresses are listed in descending order based on the amount available to stake.
- Amount: Enter the amount that you want to stake. You cannot enter the amount until the remaining staking cap for Babylon is retrieved. If the remaining staking cap is 0, staking is not allowed. Ensure that the amount you enter is within Babylon’s allowed range and does not exceed the remaining staking cap or the amount available to stake. You can click Max to automatically enter the maximum allowed amount, which is the smallest value among the remaining staking cap, the maximum one-time staking amount allowed by Babylon, and the amount available to stake.
- Staking Period: Enter the number of days you want to stake for.
- Network Fee: Select from Slow, Standard, and Fast. You can also customize your fee rate by clicking
. The network fee is deducted from your balance in addition to the specified amount to stake.
-
When you complete the form, click Preview. The following items will be checked and hints will appear under any fields with errors.
- Finality Provider: Whether the public key is valid if you have chosen to customize the finality provider.
- Amount: Whether the amount is within Babylon’s allowed range and does not exceed the amount available to stake.
- Staking Period: Whether the number of days is within Babylon’s allowed duration.
- Network Fee: Whether your balance is sufficient to cover the network fee.
-
Modify your input according to the hints, then click Preview again.
-
If all checks pass, you will see a preview of all the information, including Staking Waiting time. Review the information and click Submit. Another check will be performed to see if the staking amount exceeds Babylon’s remaining staking cap. If it does, you can go back and edit the amount. Otherwise, you can successfully submit the request.
-
In the Staking Request Submitted window, click Staking Activity to go to the staking details page.
-
On the staking details page, new records are created for the staking transaction.
-
Under Staking Positions, a record is created, and its Position Status is Staking in Progress. The final Position Status varies depending on the staking result, as the following table shows.
Staking Result Position Status Succeeds Active Rejected by the risk control policies or signers The row will not be shown Exceeds the staking cap of Babylon Limit Exceeded Rejected by Babylon Invalid - If you get the Limit exceeded status, you can unstake and withdraw the assets.
- If you get the Invalid status, it means that Babylon has upgraded its staking protocol but Cobo hasn’t updated accordingly, and therefore, Babylon could not confirm the transaction. Please contact Cobo’s customer support at help@cobo.com to recover your assets.
-
Under Activity, a record is created, and its Activity Status is Processing. If the staking request is rejected by risk control policies or signers, the status will be Failed; otherwise, it stays as Processing. Depending on whether Babylon confirms the transaction, the final status will be Success or Failed.
-
-
Click
on Cobo Portal, find Staking, then click Open to open Staking. -
Click Stake under Actions in the row for Babylon.
-
In the pop-up window, fill in the following information.
- PoS Chain: Select a Proof of Stake (PoS) chain.
- Finality Provider: You can either select a finality provider from the drop-down list or customize your finality provider by clicking Customize and entering the public key.
- Staking Wallet: Select an address from the drop-down list. The addresses are listed in descending order based on the amount available to stake.
- Amount: Enter the amount that you want to stake. You cannot enter the amount until the remaining staking cap for Babylon is retrieved. If the remaining staking cap is 0, staking is not allowed. Ensure that the amount you enter is within Babylon’s allowed range and does not exceed the remaining staking cap or the amount available to stake. You can click Max to automatically enter the maximum allowed amount, which is the smallest value among the remaining staking cap, the maximum one-time staking amount allowed by Babylon, and the amount available to stake.
- Staking Period: Enter the number of days you want to stake for.
- Network Fee: Select from Slow, Standard, and Fast. You can also customize your fee rate by clicking . The network fee is deducted from your balance in addition to the specified amount to stake.
-
When you complete the form, click Preview. The following items will be checked and hints will appear under any fields with errors.
- Finality Provider: Whether the public key is valid if you have chosen to customize the finality provider.
- Amount: Whether the amount is within Babylon’s allowed range and does not exceed the amount available to stake.
- Staking Period: Whether the number of days is within Babylon’s allowed duration.
- Network Fee: Whether your balance is sufficient to cover the network fee.
-
Modify your input according to the hints, then click Preview again.
-
If all checks pass, you will see a preview of all the information, including Staking Waiting time. Review the information and click Submit. Another check will be performed to see if the staking amount exceeds Babylon’s remaining staking cap. If it does, you can go back and edit the amount. Otherwise, you can successfully submit the request.
-
In the Staking Request Submitted window, click Staking Activity to go to the staking details page.
-
On the staking details page, new records are created for the staking transaction.
-
Under Staking Positions, a record is created, and its Position Status is Staking in Progress. The final Position Status varies depending on the staking result, as the following table shows.
Staking Result Position Status Succeeds Active Rejected by the risk control policies or signers The row will not be shown Exceeds the staking cap of Babylon Limit Exceeded Rejected by Babylon Invalid - If you get the Limit exceeded status, you can unstake and withdraw the assets.
- If you get the Invalid status, it means that Babylon has upgraded its staking protocol but Cobo hasn’t updated accordingly, and therefore, Babylon could not confirm the transaction. Please contact Cobo’s customer support at help@cobo.com to recover your assets.
-
Under Activity, a record is created, and its Activity Status is Processing. If the staking request is rejected by risk control policies or signers, the status will be Failed; otherwise, it stays as Processing. Depending on whether Babylon confirms the transaction, the final status will be Success or Failed.
-
ETH Staking requires users to stake ETH in units of 32 (e.g., 32, 64, 96 ETH) through validators on the Beacon Chain. To stake ETH, users with the Staker role select a node provider, specify an MPC Wallet in an Organization-Controlled Vault as the staking wallet, and enter the stake amount. The request then goes through validation and risk control before being submitted to the chain.
-
Click
on Cobo Portal, find Staking, then click Open to open Staking. -
Click Stake under Actions in the row for Beacon Chain.
-
In the pop-up window, fill in the following information.
- Ethereum Node Provider: Select a provider from the drop-down list. Currently, Stakefish is the only supported Node Provider.
- Staking Wallet: Select an address from the drop-down list. The addresses are listed in descending order based on the amount available to stake.
- Amount: Enter the amount that you want to stake by the number of validators. Each validator requires 32 ETH. Enter a positive integer and ensure that the amount does not exceed the amount available to stake or the limit of the Ethereum Node Provider. Click Max to fill in the maximum available amount.
- Network Fee: Select from Slow, Standard, and Fast. You can also customize your fee rate by clicking . The network fee is deducted from your balance in addition to the specified amount to stake.
-
When you complete the form, click Preview. The following items will be checked and hints will appear under any fields with errors.
- Amount: Whether the amount is allowed.
- Network fee: Whether your balance is sufficient to cover the network fee.
-
Modify your input according to the hints, then click Preview again.
-
If all checks pass, you will see a preview of all the information, including validator public keys (each validator you create is assigned a public key) and the estimated time for ETH deposit and validator activation. Review the information and click Submit.
-
In the Staking Request Submitted window, click Staking Activity to go to the staking details page.
-
On the staking details page, new records are created for the staking transaction.
-
Under Staking Positions, a record is created, and its Status is Staking in Progress. The final Status depends on the staking result, as the following table shows.
Staking Result Status Succeeds Active Rejected by the risk control policies or signers The row will not be shown Fails to go on-chain due to insufficient gas The row will not be shown Fails to activate validators The row will not be shown To view the list of validators, click Check in the row of the ETH being staked. Alternatively, click View in the row of the staking position, find Validator Public Key, and click the number (if there are multiple validators) to view the list of validators.
-
Under Activity, a record is created, and its Activity Status is Processing. The final Activity Status depends on the staking result, as the following table shows.
Staking Result Activity Status Succeeds Success Rejected by the risk control policies or signers Failed Fails to go on-chain due to insufficient gas Failed Fails to activate validators Failed
-